Mayenite Synthesis from Hydroxide Precursors: Structure Formation and Active Sites on Its Surface

We studied the formation process of a mayenite structure from hydroxide precursors in different gas media. According to X-ray diffraction data, this method allows a well-crystallized mayenite (Ca(12)Al(14)O(33) or C12A7) phase to be obtained at low (500–900 °C) temperatures with an insignificant impurity of CaO. It was shown that the lattice parameters for C12A7 obtained in an inert atmosphere (Ar) were lower when compared with similar samples in the air. These results can be explained by the different levels of oxygen nonstoichiometry in the resulting phase. We noted that sintering and crystallization of mayenite proceeds at lower temperatures in Ar than in the air medium. We found the presence of donor and acceptor active sites on the surface of mayenite, which was detected by the spin probe method. The specific (per unit surface) concentration of such sites (2.5 × 10(16) m(−2) and 1.5 × 10(15) m(−2) for donor and acceptor sites, respectively) is comparable to that of γ-Al(2)O(3), which is traditionally used as catalyst support. This allows it to be used in adsorption and catalytic technologies, taking into account its high specific surface area (~30–50 m(2)/g at a low synthesis temperature).