Quasi-Static and Fatigue Properties of Thermoset Sandwiches with 3D Continuous Fibre Reinforced Polyurethane Foam Core

Innovative materials for substituting metals are required to reduce the mass of moving components. This decreases the CO(2) emissions of overall systems. A thermoset sandwich for high mechanical properties and thermal insulation is presented in this paper. It has an innovative 3D continuous reinforced core, which allows the optimisation of the substance exploitation by wide-ranging possibilities of fibre orientation. This was demonstrated with three sandwich variants. The reference had no core reinforcement and the other two were reinforced with different spacer fabrics. The process chain for the manufacturing consists of Structural Reaction Injection Moulding (SRIM) and Vacuum Assisted Resin Transfer Moulding (VARTM). Significant increases in absolute as well as specific characteristic values were demonstrated by the reinforcement in a compression and bending test. It was also shown that quasi-static characteristic values under fatigue loading are maintained to a greater extent with the core reinforcement. The sandwich material was applied as a floor assembly for a snow groomer. The design was tailor-made for the mechanical, thermal and acoustic requirements. This proved the transferability of the process chain for manufacturing samples to the production of large-volume components with complex geometry.