Selective Leaching of Inert Mineral Product and the RO Phase in Steel Slag with Acetum to Improve Total Fe Content

The chemical and mineral components of the leaching residues obtained during the leaching of inert mineral product (IMP) and two samples of divalent metal oxide continuous solid solution (RO phase) by acetum at 20 °C were analyzed to reveal the selective leaching characteristics of the chemical and mineral components in steel slag, and clarify the leaching rates and differences of MgO and FeO in the RO phase. The results indicated that the content of total Fe (TFe) in the leaching residue increased, whereas the contents of CaO, SiO(2), and MgO decreased during the leaching of the inert mineral product by acetum. Fe(3)O(4) was insoluble in acetum. The leaching rates of the RO phase and metallic Fe were very low, while those of calcium silicate (C(2)S + C(3)S) and dicalcium ferrite (C(2)F) were quite high. MgO and FeO in the RO phase continuously leached over time, and the leaching rate of MgO reached 1.9 times that of FeO. Therefore, during the leaching of the RO phase by acetum, the FeO content increased, whereas the MgO content decreased. In conclusion, acetum leaching can effectively improve the TFe content of the RO phase and the inert mineral product.