Passively Mode-Locked Er-Doped Fiber Laser Based on Sb(2)S(3)-PVA Saturable Absorber

In this paper, antimony trisulfide (Sb(2)S(3)) was successfully prepared with the liquid phase exfoliation method and embedded into polyvinyl alcohol (PVA) as a saturable absorber (SA) in a passively mode-locked Er-doped fiber laser for the first time. Based on Sb(2)S(3)-PVA SA with a modulation depth of 4.0% and a saturable intensity of 1.545 GW/cm(2), a maximum average output power of 3.04 mW and maximum peak power of 325.6 W for the stable mode-locked pulses was achieved with slope a efficiency of 0.87% and maximum single pulse energy of 0.81 nJ at a repetition rate of 3.47 MHz under a pump power of 369 mW. A minimum pulse width value of 2.4 ps with a variation range less than 0.1 ps, and a maximum signal to noise ratio (SNR) of 54.3 dB indicated reliable stability of mode-locking, revealing promising potentials of Sb(2)S(3) as a saturable absorber in ultrafast all-fiber lasers.