Experimental Investigation on High Capacity Stove-Powered Thermoelectric Generator Incorporated with a Novel Heat Collector

It is vital to supply necessary electric power during natural disasters and in deprived regions. A novel heat collector is proposed to improve the capacity of the stove-powered thermoelectric generator (SPTEG). Enclosed combustion walls are constructed with four W-shape copper plates, and act as a whole to be an exceptional heat collector, which was not previously reported in TEG studies. Forty TE modules are installed and two DC–DC converters are employed to stabilize the electric power. Owing to the novel heat collector, the generated electric power reaches 0.024 W/K per unit temperature difference for an individual TE module, which is 200% higher than the previous record (0.008 W/K) when forty TE modules are incorporated. The proposed SPTEG is able to generate a net electric power of 119 W, which is considerably larger than the previous record (75.2 W). The corresponding TE efficiency reaches 3.12%, which is measured at a temperature difference of 140 °C. The startup performance, power load feature, and cooling water flow rate of the SPTEG are studied in detail. Furthermore, one-dimensional theoretical analyses are conducted to explore the SPTEG performance. The theoretical electric power agrees well with the experimental data when DC–DC converters are not involved. Applying DC–DC converters to stabilize the electric power will alter the impendence of the SPTEG, resulting in much lower electric power output than that without DC–DC converters.