Reducing Friction in Orthodontic Brackets: A Matter of Material or Type of Ligation Selection? In-Vitro Comparative Study

(1) Background: Orthodontic appliances have changed and improved with the increasing demand for orthodontic treatment of the general population. Patients desire for shorter orthodontic treatments and for the wearing of more aesthetic devices has led to the technological development of orthodontic brackets; these were manufactured from aesthetic materials (ceramics, composite polymers) and presented different designs regarding the way archwires are ligated to the bracket. The aim of this study was to determine whether there were any differences between the static frictional forces generated by stainless steel (metallic) and polycrystalline alumina (ceramics) conventional and self-ligating brackets. (2) Methods: Static friction assessment was carried out in vitro with a universal testing machine, HV-500N-S (Schmidt Control Instruments, Hans Schmidt & Co. GmbH), intended for measuring compression and traction forces. (3) Results: The study revealed significant differences in static frictional forces at the bracket-archwire interface between the tested brackets. Stainless steel brackets produced lower static friction forces than polycrystalline alumina and self-ligating brackets generally produced lower static frictional forces than conventional brackets. The reduction of frictional forces was noticeable in the first stages of treatment, when thin, flexible orthodontic archwires (0.016” NiTi) are used. Engaged with large rectangular stainless steel archwires, (0.019 × 0.025” SS), the frictional forces produced by conventional and self-ligating metal brackets were similar, no significant differences being observed between the two types of metallic design. However, in the case of tested ceramic brackets, the results showed that the self-ligating type allows a reduction in frictional forces even in advanced stages of treatment compared to conventionally ligation. (4) Conclusions: From the perspective of an orthodontic system with low frictional forces, metal brackets are preferable to aesthetic ones, and self-ligating ceramic brackets are preferable to conventional ceramic brackets.