Determinants of Respirable Quartz Exposure Concentrations Across Occupations in Denmark, 2018

BACKGROUND: High concentrations of respirable quartz have been reported from workers in construction, foundries, and quarries. Current exposure concentrations in prevalent but presumably lower exposed occupations have been less examined. We aimed to quantify current exposure concentrations of respirable dust and quartz across prevalent occupations and to identify determinants of respirable quartz exposure across these occupations. METHODS: One hundred and eighty-nine full-shift personal samples of respirable dust of workers within 11 occupations in Denmark were sampled during 2018. Respirable dust was determined gravimetrically and analysed for quartz content with infrared spectrometry. Determinants for respirable quartz exposure, i.e. use of power tools, outdoor or indoor location, and percentage of quartz in respirable dust, were analysed in linear mixed effect models. RESULTS: The overall geometric means (geometric standard deviations) for respirable dust and quartz were 216 µg m(−3) (4.42) and 16 µg m(−3) (4.07), respectively. The highest quartz concentrations were observed among stone cutters and carvers [93 µg m(−3) (3.47)], and metal melters and casters [61 µg m(−3) (1.71)]. Use of power tools increased exposure concentrations of quartz by a factor of 3.5. Occupations explained 27%, companies within occupations 28%, and differences between workers within companies within occupations 14% of the variability in quartz concentrations. Thirty percent was due to day-to-day variability in exposure concentrations. In total, 19% of the variation in quartz concentration could be explained by type of tool, indoor/outdoor location, and percentage of quartz in respirable dust. CONCLUSION: Current exposure concentrations are generally low, but some occupations in this study had average exposure concentrations to respirable quartz above the ACGIH threshold limit value of 25 µg m(−3). Preventive measures to lower excess risk of quartz-related diseases among these workers are still needed. In terms of preventive strategies, use of power tools and quartz content of used materials were identified as main determinants of exposure. Lowering of exposures will be most efficient when focussed on these major determinants, e.g. tool dust control with water, dust extraction, and use of low quartz content materials.