Novel preparation of functional β-SiC fiber based In(2)O(3) nanocomposite and controlling of influence factors for the chemical gas sensing

The gas sensing ability of a pure β-SiC fiber is limited due to its low-sensitivity and selectivity with poor recovery time during a gas sensing test. The combination of functional β-SiC fibers with metal-oxide (MO) can lead to excellent electronic conductivity, boosted chemical activity, and high reaction activity with the target gas and β-SiC–In(2)O(3) sensor material. Influence factors such as amounts of MO, current collectors, and gas species (CO(2), O(2) and without gas) for the gas sensing ability of β-SiC–In(2)O(3) nanocomposite were determined at standard room temperature (25 °C) and high temperature (350 °C) conditions. The gas sensing ability of the functional β-SiC fiber was significantly enhanced by the loading of In(2)O(3) metal-oxide. In addition, the MO junction on the β-SiC fiber was mainly subjected to the Si–C–O–In bond sensor layer with an effective electron-transfer ability. The gas sensing mechanism was based on the transfer of charges, in which the sensing material acted as an absorber or a donor of charges. The sensor material could use different current- collectors to support the electron transfer and gas sensing ability of the material. A 1:0.5M SiC–In(2)O(3) coated Ni-foil current collector sensor showed better sensing ability for CO(2) and O(2) gases than other gas sensors at room temperature and high temperature conditions. The sensing result of the electrode was obtained with different current density values without or with gas purging conditions because CO(2) and O(2) gases had electron acceptor properties. During the gas sensing test, the sensor material donated electrons to target gases. The current value on the CV graph then significantly changed. Our obtained sample analysis data and the gas sensing test adequately demonstrated that MO junctions on functional β-SiC fibers could improve the sensitivity of a sensor material and particularly upgrade the sensor material for gas sensing.