Efficient multi-barrier thin film encapsulation of OLED using alternating Al(2)O(3) and polymer layers

Organic optoelectronic devices, especially for OLEDs, are extremely susceptibility to water vapor and oxygen which limit their widespread commercialization. In order to extend the shelf-lifetime of devices, thin film encapsulation is the most promising and challenging encapsulation process. In this study, dyad-style multilayer encapsulation structures based on alternating Al(2)O(3) layer and parylene C have been discussed as gas diffusion barriers, in which dense and pinhole-free Al(2)O(3) films were grown by atomic layer deposition (ALD) and flexible parylene C layers were deposited by chemical vapor deposition (CVD). We found the particle in ALD deposited Al(2)O(3) films process is the key killer to barrier property. The thickness of Al(2)O(3) films is the key factor which limit the amount of strain placed on barrier films. With three dyads of the optimal thickness of 30 nm Al(2)O(3) film and 500 nm parylene C, WVTR value is lower than 10(−5) g m(−2) per day. In addition, the lifetime of OLEDs with and without encapsulation was 190 h and 10 h, respectively. All the results show that this TFE structure has the effective encapsulated property and does not cause degradation of the OLED devices.