From Low to High Saturation Magnetization in Magnetite Nanoparticles: The Crucial Role of the Molar Ratios Between the Chemicals

[Image: see text] In this study, a comprehensive characterization of iron oxide nanoparticles synthesized by using a simple one-pot thermal decomposition route is presented. In order to obtain monodisperse magnetite nanoparticles with high saturation magnetization, close to the bulk material, the molar ratios between the starting materials (solvents, reducing agents, and surfactants) were varied. Two out of nine conditions investigated in this study resulted in monodisperse iron oxide nanoparticles with high saturation magnetization (90 and 93% of bulk magnetite). The X-ray diffraction analyses along with the inspection of the lattice structure through transmission electron micrographs revealed that the main cause of the reduced magnetization in the other seven samples is likely due to the presence of distortion and microstrain in the particles. Although the thermogravimetric analysis, Raman and Fourier transform infrared spectroscopies confirmed the presence of covalently bonded oleic acid on the surface of all the samples, the particles with higher polydispersity and the lowest surface coating molecules showed the lowest saturation magnetization. Based on the observed results, it could be speculated that the changes in the kinetics of the reactions, induced by varying the molar ratio of the starting chemicals, can lead to the production of the particles with higher polydispersity and/or lattice deformation in their crystal structures. Finally, it was concluded that the experimental conditions for obtaining high-quality iron oxide nanoparticles, particularly the molar ratios and the heating profile, should not be chosen independently; for any specific molar ratio, there may exist a specific heating profile or vice versa. Because this synthetic consideration has rarely been reported in the literature, our results can give insights into the design of iron oxide nanoparticles with high saturation magnetization for different applications.