The Supported Boro-Additive Effect for the Selective Recovery of Dy Elements from Rare-Earth-Elements-Based Magnets

Liquid metal extraction (LME) for recycling rare-earth elements from magnets is studied, in the present study, to examine its suitability as an environmentally friendly alternative for a circular economy. While Nd (neodymium) extraction efficiency can easily reach almost 100%, based on the high reactivity of Mg (magnesium), Dy (dysprosium) extraction has been limited because of the Dy–Fe intermetallic phase as the main extractive bottleneck. In the present paper, the boro-additive effect is designed thermodynamically and examined in the ternary and quinary systems to improve the selectivity of recovery. Based on the strong chemical affinity between B (boron) and Fe, the effect of excess boron, which is produced by the depletion of B in FeB by Mg, successfully resulted in the formation of Fe(2)B instead of Dy–Fe bonding. However, the growth of the Fe(2)B layer, which is the reason for the isolated Mg, leads to the production of other byproducts, rare-earth borides (RB(4), R = Nd and Dy), as the side effect. By adjusting the ratio of FeB, the extraction efficiency of Dy over 12 h with FeB addition is improved to 80%, which is almost the same extraction efficiency of the conventional LME process over 24 h.