Preparation, Characterization, and Performance Evaluation of Petroleum Asphalt Modified with Bio-Asphalt Containing Furfural Residue and Waste Cooking Oil

The study aims to analyze the feasibility of proposing waste cooking oil and industrial waste furfural residue as raw materials to prepare bio-asphalt as partial substitutes for petroleum asphalt, so as to reduce the cost of pavement construction and decrease the consumption of non-renewable resources. In this study, 90# petroleum asphalt was partially substituted with the bio-asphalt in different proportions to prepare biomass-modified petroleum asphalt, the performance of which was first evaluated based on three indices: penetration, softening point, and ductility. Comparison of the crystal structures of the bio-asphalt and furfural residue were enabled by X-ray diffraction, and the blending mechanism and microscopic morphologies of the biomass-substituted asphalt mixtures were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The results showed that the bio-asphalt was hydrophobic and exhibited excellent compatibility with 90# petroleum asphalt. The partial substitution of petroleum asphalt with bio-asphalt improved the low-temperature crack resistance of the asphalt by adversely affecting the high-temperature stability of the asphalt; however, when the bio-asphalt content was 8 wt.%, the performance parameters of the biomass-modified asphalt met the requirements of the 90# petroleum asphalt standard.