Cargando…

Titanium and Silicon Dioxide-Coated Fabrics for Management and Tuning of Infrared Radiation

Far infrared radiation (FIR) is emitted by every body at a given temperature, including the human body. FIR ranging between 4–14 μm is considered useful for cell growth, and the human body emits a maximum of infrared (IR) radiation at the wavelength of approximately 9.3 µm. In the present study, fab...

Descripción completa

Detalles Bibliográficos
Autores principales: Yuce, Ismail, Canoglu, Suat, Yukseloglu, Sevhan Muge, Li Voti, Roberto, Cesarini, Gianmario, Sibilia, Concita, Larciprete, Maria Cristina
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2022
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9143692/
https://www.ncbi.nlm.nih.gov/pubmed/35632326
http://dx.doi.org/10.3390/s22103918
Descripción
Sumario:Far infrared radiation (FIR) is emitted by every body at a given temperature, including the human body. FIR ranging between 4–14 μm is considered useful for cell growth, and the human body emits a maximum of infrared (IR) radiation at the wavelength of approximately 9.3 µm. In the present study, fabrics based on five different raw textiles having the same yarn count as well as the same weaving patterns were designed and created. Some of them were subjected to a coating process. The fabrics to be tested were as follows: coated with TiO(2) nanoparticles, coated with SiO(2) nanoparticles, coated fabric that does not contain bioceramic nanoparticle (BNFC), and non-coated fabrics (NCF). The structural characterization of the resulting samples was performed using scanning electron microscopy (SEM), abrasion tests, and air permeability. Following the structural characterization, the infrared emissivity properties were investigated using infrared thermography as well as attenuated total reflectance Fourier-transform infrared spectroscopy in the 8–14 IR range. According to the experimental findings, the fabrics coated with TiO(2) and SiO(2) displayed increased infrared emissivity values compared to the uncoated ones. In addition, it was observed that the use of bioceramic powders had no effect on air permeability and abrasion properties.