Research on the Industrial Robot Grasping Method Based on Multisensor Data Fusion and Binocular Vision

At present, most of the handling industrial robots working on the production line are operated by teaching or preprogramming, which makes the flexibility of the production line poor and does not meet the flexible production requirements of the material handling system. This study proposes a solution based on adding computer binocular vision to a five-axis industrial robot system. A simple and high-precision binocular camera calibration method is proposed, the kinematics of the five-axis robot is analyzed, and the target positioning is realized; the communication between the upper and lower robots is realized through Ethernet. According to the specific target, the grasping scheme of the gripper was designed; the control software was developed using two schemes. Visual control is carried out by operating specific buttons on the control panel, and visual control is carried out by executing the macrovariable program, finally realizing the joint fusion of multisensor data and binocular vision.