Experimental Study of the Pyrolysis of NH(3) under Flow Reactor Conditions

[Image: see text] The possibility of using ammonia (NH(3)), as a fuel and as an energy carrier with low pollutant emissions, can contribute to the transition to a low-carbon economy. To use ammonia as fuel, knowledge about the NH(3) conversion is desired. In particular, the conversion of ammonia under pyrolysis conditions could be determinant in the description of its combustion mechanism. In this work, pyrolysis experiments of ammonia have been performed in both a quartz tubular flow reactor (900–1500 K) and a non-porous alumina tubular flow reactor (900–1800 K) using Ar or N(2) as bath gas. An experimental study of the influence of the reactor material (quartz or alumina), the bulk gas (N(2) or Ar), the ammonia inlet concentration (1000 and 10 000 ppm), and the gas residence time [2060/T (K)–8239/T (K) s] on the pyrolysis process has been performed. After the reaction, the resulting compounds (NH(3), H(2), and N(2)) are analyzed in a gas chromatograph/thermal conductivity detector chromatograph and an infrared continuous analyzer. Results show that H(2) and N(2) are the main products of the thermal decomposition of ammonia. Under the conditions of the present work, differences between working in a quartz or non-porous alumina reactor are not significant under pyrolysis conditions for temperatures lower than 1400 K. Neither the bath gas nor the ammonia inlet concentration influence the ammonia conversion values. For a given temperature and under all conditions studied, conversion of ammonia increases with an increasing gas residence time, which results into a narrower temperature window for NH(3) conversion.