A Novel Technique for Occipitocervical Fusion with Triple Rod Connection to Prevent Implant Failure

Occipitocervical fusion is an effective surgical method for treating various upper cervical disorders. However, complications such as implant failure due to rod breakage have been reported. Therefore, we devised a surgical technique for occipitocervical fusion with a triple rod connection to prevent implant failure. Occipitocervical fusion with triple rod connection was performed in two cases with a high risk of instability such as athetoid cerebral palsy and rheumatoid arthritis. A multiaxial screw (diameter: 4.5 mm) was inserted into the screw hole in the middle of the occipital plate, and subsequently, an additional rod was attached. It was connected to the main rod using an offset connector at the caudal side. The connection of the additional rod was simple and did not interfere with the fusion bed for bone graft between the occipital bone and axis. The head of the screw was crimped to the occipital plate, and the plate was firmly fixed. Moreover, since the head of the screw did not protrude to the dorsal side, the tension of the soft tissue and skin did not increase. No complications occurred after surgery in both cases. In addition, no special instruments were required to connect the additional rod to the main rod in this procedure. Therefore, our technique may be useful as an option to prevent implant failure due to rod breakage at the craniocervical junction.