Cargando…

A 1.8–2.7 GHz Triple-Band Low Noise Amplifier with 31.5 dB Dynamic Range of Power Gain and Adaptive Power Consumption for LTE Application

This paper presents a multi-gain radio frequency (RF) front-end low noise amplifier (LNA) utilizing a multi-core based on the source degeneration topology. The LNA can cover a wide range of input and output frequency matching by using a receiver (RX) switch at the input and a capacitor bank at the o...

Descripción completa

Detalles Bibliográficos
Autores principales: Asl, S. Ali Hosseini, Rad, Reza E., Rikan, Behnam S., Pu, YoungGun, Hwang, Keum Cheol, Yang, Youngoo, Lee, Kang-Yoon
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2022
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9185466/
https://www.ncbi.nlm.nih.gov/pubmed/35684660
http://dx.doi.org/10.3390/s22114039
_version_ 1784724731131330560
author Asl, S. Ali Hosseini
Rad, Reza E.
Rikan, Behnam S.
Pu, YoungGun
Hwang, Keum Cheol
Yang, Youngoo
Lee, Kang-Yoon
author_facet Asl, S. Ali Hosseini
Rad, Reza E.
Rikan, Behnam S.
Pu, YoungGun
Hwang, Keum Cheol
Yang, Youngoo
Lee, Kang-Yoon
author_sort Asl, S. Ali Hosseini
collection PubMed
description This paper presents a multi-gain radio frequency (RF) front-end low noise amplifier (LNA) utilizing a multi-core based on the source degeneration topology. The LNA can cover a wide range of input and output frequency matching by using a receiver (RX) switch at the input and a capacitor bank at the output of the LNA. In the proposed architecture here, to avoid the saturation of RX chain, 12 gain steps including positive, 0 dB, and negative power gains are controlled by a mobile industry processor interface (MIPI). The multi-core architecture offers the ability to control the power consumption over different gain steps. In order to avoid the phase discontinuity, the negative gain steps are provided using an active amplification and T-type attenuation path that keeps the phase discontinuity below ±5 degrees between two adjacent power gain steps. Using the multi-core structure, the power consumption is optimized in different power gains. The structure is enhanced with the adaptive variable cores and reactance parameters to maintain different power consumption for different gain steps and remain the output matching in an acceptable operating range. Furthermore, auxiliary linearization circuitries are added to improve the input third intercept point (IIP3) performance of the LNA. The chip is fabricated in 65 nm complementary metal-oxide semiconductor (CMOS) silicon on insulator (SOI) process and the die area is 0.308 mm(2). The proposed architecture achieves the IIP3 performance of −10.2 dBm and 8.6 dBm in the highest and lowest power gains, which are 20.5 dB and −11 dB, respectively. It offers the noise figure (NF) performance of 1.15 dB in the highest power gain while it reaches 14 dB when the power gain is −11 dB. The LNA consumes 16.8 mA and 1.33 mA current from a 1 V power supply that is provided by an on-chip low-dropout (LDO) when it operates at the highest and lowest gains, respectively.
format Online
Article
Text
id pubmed-9185466
institution National Center for Biotechnology Information
language English
publishDate 2022
publisher MDPI
record_format MEDLINE/PubMed
spelling pubmed-91854662022-06-11 A 1.8–2.7 GHz Triple-Band Low Noise Amplifier with 31.5 dB Dynamic Range of Power Gain and Adaptive Power Consumption for LTE Application Asl, S. Ali Hosseini Rad, Reza E. Rikan, Behnam S. Pu, YoungGun Hwang, Keum Cheol Yang, Youngoo Lee, Kang-Yoon Sensors (Basel) Communication This paper presents a multi-gain radio frequency (RF) front-end low noise amplifier (LNA) utilizing a multi-core based on the source degeneration topology. The LNA can cover a wide range of input and output frequency matching by using a receiver (RX) switch at the input and a capacitor bank at the output of the LNA. In the proposed architecture here, to avoid the saturation of RX chain, 12 gain steps including positive, 0 dB, and negative power gains are controlled by a mobile industry processor interface (MIPI). The multi-core architecture offers the ability to control the power consumption over different gain steps. In order to avoid the phase discontinuity, the negative gain steps are provided using an active amplification and T-type attenuation path that keeps the phase discontinuity below ±5 degrees between two adjacent power gain steps. Using the multi-core structure, the power consumption is optimized in different power gains. The structure is enhanced with the adaptive variable cores and reactance parameters to maintain different power consumption for different gain steps and remain the output matching in an acceptable operating range. Furthermore, auxiliary linearization circuitries are added to improve the input third intercept point (IIP3) performance of the LNA. The chip is fabricated in 65 nm complementary metal-oxide semiconductor (CMOS) silicon on insulator (SOI) process and the die area is 0.308 mm(2). The proposed architecture achieves the IIP3 performance of −10.2 dBm and 8.6 dBm in the highest and lowest power gains, which are 20.5 dB and −11 dB, respectively. It offers the noise figure (NF) performance of 1.15 dB in the highest power gain while it reaches 14 dB when the power gain is −11 dB. The LNA consumes 16.8 mA and 1.33 mA current from a 1 V power supply that is provided by an on-chip low-dropout (LDO) when it operates at the highest and lowest gains, respectively. MDPI 2022-05-26 /pmc/articles/PMC9185466/ /pubmed/35684660 http://dx.doi.org/10.3390/s22114039 Text en © 2022 by the authors. https://creativecommons.org/licenses/by/4.0/Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
spellingShingle Communication
Asl, S. Ali Hosseini
Rad, Reza E.
Rikan, Behnam S.
Pu, YoungGun
Hwang, Keum Cheol
Yang, Youngoo
Lee, Kang-Yoon
A 1.8–2.7 GHz Triple-Band Low Noise Amplifier with 31.5 dB Dynamic Range of Power Gain and Adaptive Power Consumption for LTE Application
title A 1.8–2.7 GHz Triple-Band Low Noise Amplifier with 31.5 dB Dynamic Range of Power Gain and Adaptive Power Consumption for LTE Application
title_full A 1.8–2.7 GHz Triple-Band Low Noise Amplifier with 31.5 dB Dynamic Range of Power Gain and Adaptive Power Consumption for LTE Application
title_fullStr A 1.8–2.7 GHz Triple-Band Low Noise Amplifier with 31.5 dB Dynamic Range of Power Gain and Adaptive Power Consumption for LTE Application
title_full_unstemmed A 1.8–2.7 GHz Triple-Band Low Noise Amplifier with 31.5 dB Dynamic Range of Power Gain and Adaptive Power Consumption for LTE Application
title_short A 1.8–2.7 GHz Triple-Band Low Noise Amplifier with 31.5 dB Dynamic Range of Power Gain and Adaptive Power Consumption for LTE Application
title_sort 1.8–2.7 ghz triple-band low noise amplifier with 31.5 db dynamic range of power gain and adaptive power consumption for lte application
topic Communication
url https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9185466/
https://www.ncbi.nlm.nih.gov/pubmed/35684660
http://dx.doi.org/10.3390/s22114039
work_keys_str_mv AT aslsalihosseini a1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT radrezae a1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT rikanbehnams a1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT puyounggun a1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT hwangkeumcheol a1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT yangyoungoo a1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT leekangyoon a1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT aslsalihosseini 1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT radrezae 1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT rikanbehnams 1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT puyounggun 1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT hwangkeumcheol 1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT yangyoungoo 1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication
AT leekangyoon 1827ghztriplebandlownoiseamplifierwith315dbdynamicrangeofpowergainandadaptivepowerconsumptionforlteapplication