Study on sand liquefaction induced by Songyuan earthquake with a magnitude of M5.7 in China

A large-scale sand liquefaction producing typical and novel surface phenomena was found at the epicenter of Songyuan M5.7 earthquake occurring on May 28, 2018. Field survey and experimental test encompassing boring sampling, standard penetration test (SPT), cone penetration test (CPT), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray fluorescence (XRF) were performed to ascertain the liquefaction damage and site characteristic. Cone penetration test is an excellent assay for the identification of liquefied sand layer and acquisition of physio-mechanical parameter. Moreover, the assay is applicable for in-situ post-earthquake investigation. Factors promoting the formation and controlling the distribution of the sand liquefaction were analyzed. The liquefaction impacted an 80 km2 area, and was primarily embodied as sand boil and water sprout on rice field, despite producing no significant structural damage. Due to the simple profile of local soil layer, ground motion, geomorphic condition, and groundwater level were the main factors governing the distribution of the liquefaction. Majority of the liquefied sand layer was discovered at the depth less than 10 m. However, deep layer liquefaction at the depth greater than 18 m was also discovered, which was demonstrated by the upward movement of liquefied sand towards the upper silty clay layer at the depth of 17 m. Most importantly, we have identified loess liquefaction, a phenomenon which had not been reported previously in Northeast China. Lastly, it is important to highlight the risk of significant liquefaction damage at Songyuan. Hence, investigating the liquefaction risk is potentially beneficial for augmenting planning on earthquake mitigation, engineering reconnaissance, and design project.