Pile caps with inclined shear reinforcement and steel fibers

This experimental investigation presents results and a discussion on a series of four reinforced concrete pile caps with and without steel fibers, measuring 400 × 400 × 1000 mm(3), which were tested under concentric loading. The study set the steel fiber and the inclined shear reinforcement as variables. The fiber volume fraction was 1.5%, and the concrete compressive strength was 25 MPa. The results showed a tendency to increase ductility and ultimate strength with the use of inclined shear reinforcement; the same behavior was observed with the addition of steel fibers, improving the performance of the tested pile caps. This study opens the possibility of designing slender pile caps, especially when associated with both analyzed parameters.