Friction Properties of Solid Lubricants with Different Multiwalled Carbon Nanotube Contents

Bushes are circular bearings that surround a shaft and help it rotate smoothly. In heavy equipment, bushes are coated with solid lubricants to reduce friction. Although the coating layer of the lubricant has a stable coefficient of friction (CoF), it is important that this should last for a long time. In this study, multiwalled carbon nanotubes (MWCNTs), which have a low CoF, were added to the lubricant to improve its performance. When 2.3 wt% MWCNTs were added to the polymer resin, the dynamic CoF (under a 29 N external load) decreased by 78% in relation to that of the resin without MWCNTs. As the MWCNT content increased, the roughness of the coating decreased, which reduced the CoF. Moreover, MWCNT addition increased the overall tensile strength owing to an increase in the bonding force between the resins. Under a high load of 20 tonnes (t), the MWCNT-based solid lubricant had a CoF of 0.05, lower than commercial MoS(2)-based solid lubricants; this was maintained for more than 10,000 cycles in a bush and shaft test. With the MWCNT-based solid lubricant, a lubricating polymer film formed, even on worn bush surfaces. The CoF of the solid lubricant was reduced and the number of cycles with a constant CoF increased when MWCNTs were added owing to the formation of the lubricating polymer film.