Microstructure and Phase Evolution of Ti-Al-C-Nb Composites Prepared by In Situ Selective Laser Forming

In the present work, a novel Ti-Al-C-Nb composite was prepared using in situ selective laser forming (ISLF). The formation mechanism of the Ti-Al-C-Nb bulks, which were synthesized using elemental titanium, aluminum, and carbon (graphite) powders via ISLF techniques, was investigated. The results showed that the Ti(3)Al and TiC phases were the dominant synthesis products during the chemical reactions, and these occurred during the ISLF process. The size of the fine nanoscale crystal TiC grains could reach 157 nm at an energy level of 60 J/mm(3). The porous structure of the ISLF specimens was disclosed, and an open porosity of 20–44% was determined via the scanning speed and the laser power. Both the high dynamic viscosity and the reactions of the raw powders led to the generation of a considerable number of pores, whereas the specimen processed using 45 W and 100 mm/s possessed the lowest degree of open porosity.