Study on model plant based functional beverage emulsion (non-dairy) using ultrasound – A physicochemical and functional characterization

This study reports the development of non-dairy functional beverage emulsion employing ultrasound (US) of 20 kHz at 130 W and 195 W at processing times of 2 to 8 min using chickpea milk extract and bioactive, flaxseed oil (4%). The pre-emulsion was formed with high shear homogenizer followed by main sonication process. The sonicated emulsions were stored at 4 ± 2 °C till 14 days and characterized for physicochemical and functional properties. A comparative study was carried out using conventional high shear homogenizer (UT) at 10,000 RPM for 5 min. Upon optimization, 130 W − 8 min, 195 W − 6 min and 195 W – 8 min sono-emulsions showed creaming stability of 100%; with particle sizes as 1.12, 0.97 and 0.78 µm; and zetapotential values as − 40.4 mV, −37.52 and −36.91 mV, respectively. The improvement in protein solubility by 86% proved the emulsifying capability of chickpea proteins, which had partially denatured upon physical effects of acoustic cavitation producing stable and finer emulsion droplets. The reduced sedimentation values of sonicated chickpea extract in comparison to UT showed improvement in physical stability of plant-based milk. Oxidative stability is observed for 130 W − 8 min sonicated emulsions with no change in conjugated dienes, indicating the absence of process generated free radicals. The US process did not have any effect on reduction of stachyose content. But extracted chickpea milk had lower amount of stachyose in comparison to raw chickpeas, reducing the flatulence problem, mainly due to adaptation of high temperature pressure cooking process.