A Simple Alcohol-based Method of Oocyst Inactivation for Use in the Development of Detection Assays for Cryptosporidium

Cryptosporidium spp. are obligate, intracellular parasites that cause life-threatening diarrhea among children and immunocompromised adults. Transmission occurs by the fecal-oral route following ingestion of thick-walled oocysts that can contaminate, persist, and resist disinfection in water and food. Sodium hypochlorite, peroxides, ozone, formaldehyde, and ammonia are suitable disinfectants against Cryptosporidium oocysts. Effective concentrations of these chemicals can be toxic and not practical for downstream research use of non-viable oocysts. Oocyst inactivation approaches such as UV light, heat, and treatments with ethanol or methanol are generally more accessible for routine lab use, yet their applicability in Cryptosporidium assay development is limited. The aims of this study were to evaluate methods of inactivation of Cryptosporidium oocysts that can be readily applied in the laboratory and test the utility of whole inactive oocysts in quantitative PCR (qPCR). Experiments were performed on C. parvum oocysts subjected to heat (75 °C/10 min) or treated with increasing concentrations of ethanol and methanol over time. Viability assays based on propidium iodide (PI) staining, in vitro excystation, and infection of the Hct-8 cell line were used to evaluate the efficacies of the treatments. Excystation of sporozoites was not impaired with 24 h exposures of oocysts to 50% ethanol or methanol, even though significant PI incorporation was observed. Concentrations of ≥70% of these chemicals were required to completely inhibit excystation and infection of Hct-8 cells in vitro. Inactivated oocysts stored for up to 30 days at 4 °C retained cyst wall integrity and antigenicity as observed by light microscopy and immunofluorescence. Moreover, non-viable oocysts applied directly in qPCR assays of the COWP gene were useful reference reagents for the identification and quantification of Cryptosporidium in spiked water samples. In summary, we have established a practical approach to inactivate C. parvum oocysts in the laboratory that is suitable for the development of detection or diagnostic assays targeting the parasite.