Oxidation Behavior of Carbon Fibers in Ceramizable Phenolic Resin Matrix Composites at Elevated Temperatures

Carbon fiber fabric-reinforced phenolic resin composites are widely used as thermal protection materials for thermal protection systems in hypersonic vehicles and capsules. In this work, carbon fiber fabric-reinforced boron phenolic resin composites modified with MoSi(2) and B(4)C were prepared via a compression molding technique. The high-temperature performance of the composites as well as the oxidation behavior of the carbon fibers was studied. The results indicate that the incorporation of B(4)C improves the performance of composites at high temperatures. The residual weight rate of composites with 15 phr B(4)C (BP-15) sufficiently increased from 23.03% to 32.91% compared with the composites without B(4)C (BP-0). After being treated at 1400 °C for 15 min, the flexural strength of BP-15 increased by 17.79% compared with BP-0. Compared with BP-0, the line ablation rate and mass ablation rate of BP-15 were reduced by 53.96% and 1.56%, respectively. In addition, MoSi(2) and B(4)C particles had a positive effect on the oxidation of carbon fibers in the composites. After treatment at 1400 °C, the diameter of the as-received carbon fiber was reduced by 31.68%, while the diameter of the carbon fiber in BP-0 and BP-15 decreased by 15.12% and 6.14%, respectively. At high temperatures, the liquid B(2)O(3) from B(4)C and MoSi(2)-derived complex-phase ceramics (MoB, MoB(2), Mo(2)C, Mo(4.8)Si(3)C(0.6)) acted as an oxygen barrier, effectively mitigating the oxidation degree of the carbon fibers.