An Environmentally-Friendly Three-Dimensional Computer-Aided Verification Technique for Plastic Parts

Plastic components play a significant role in conserving and saving energy. Plastic products provide some advantages over metal, including reducing part weight, manufacturing costs, and waste, and increasing corrosion resistance. Environmental sustainability is one of the sustainable development goals (SDGs). Currently, the non-contact computer-aided verification method is frequently employed in the plastic industry due to its high measurement efficiency compared with the conventional contact measuring method. In this study, we proposed an innovative, green three-dimensional (3D) optical inspection technology, which can perform precise 3D optical inspection without spraying anything on the component surface. We carried out the feasibility experiments using two plastic parts with complex geometric shapes under eight different proposed measurement strategies that can be adjusted according to the software interface. We studied and analyzed the differences in 3D optical inspection for building an empirical technical database. Our aim in this study is to propose a technical database for 3D optical measurements of an object without spraying anything to the component’s surface. We found that the research results fulfilled the requirements of the SDGs. Our research results have industrial applicability and practical value because the dimensional average error of the two plastic parts has been controlled at approximately 3 µm and 4.7 µm.