Production of sealed rod sources made from epoxy resin for the Saint-Petersburg brick phantom for the calibration of whole-body counters

Rod sources are a common tool for the calibration of whole-body counters in combination with the Saint-Petersburg brick phantom. Here, a method for the production of such sources in ordinary radiochemical laboratories is presented. The rod sources consist of a tubular capsule of rigid polyvinyl chloride with a radioactive filling of epoxy resin. The method allows the production of rod sources at material costs of about 1 € per rod source and of ten rod sources by one person per day. Quality-assurance measurements were performed regarding the spatial distribution of the activity within the rod sources and the distribution of the activity throughout a set of sources. The relative double standard deviation of the activities of five different segments of single rod sources was 7.1%. The relative double standard deviation within a set of 90 rod sources was 2.8% after those 11% of sources with the greatest deviation from the arithmetic mean were discarded. Tests according to ISO 2919 to certify the rod sources as sealed sources of Class 2 of this standard were successfully conducted. The bending test proved to be the most critical test for the rod sources; the sources were broken by a mass of 12–14 kg, which is only slightly more than the stipulated mass of 10.2 kg. The presented method allows for a cost- and labour-effective production of sealed radioactive rod sources and thus facilitates the application of the Saint-Petersburg brick phantom for calibrations and interlaboratory comparisons of whole-body counters.