Multi-Domains in a Single Lattice Formed by DNA Self-Assembly

[Image: see text] Using sequence programmability and the characteristics of self-assembly, DNA has been utilized in the construction of various nanostructures and the placement of specific patterns on lattices. Even though many complex structures and patterns formed by DNA assembly have been reported, the fabrication of multi-domain patterns in a single lattice has rarely been discussed. Multi-domains possessing specifically designed patterns in a single lattice provide the possibility to generate multiple patterns that enhance the pattern density in a given single lattice. Here, we introduce boundaries to construct double- and quadruple-domains with specific patterns in a single lattice and verify them with atomic force microscopy. ON, OFF, and ST (stripe) patterns on a lattice are made of DNA tiles with hairpins (ON), without hairpins (OFF), and alternating DNA tiles without and with hairpins (formed as a stripe, ST). For double- and quadruple-domain lattices, linear and cross boundaries were designed to fabricate two (e.g., ON and OFF, ON and ST, and OFF and ST) and four (OFF, ST, OFF, and ON) different types of patterns in single lattices, respectively. In double-domain lattices, each linear boundary is placed between two different domains. Similarly, four linear boundaries connected with a seed tile (i.e., a cross boundary) can separate four domains in a single lattice in quadruple-domain lattices. Due to the presence of boundaries, the pattern growth directions are different in each domain. The experimentally obtained multi-domain patterns agree well with our design. Lastly, we propose the possibility of the construction of a hexadomain lattice through the mapping from hexagonal to square grids converted by using an axial coordinate system. By proposing a hexadomain lattice design, we anticipate the possibility to extend to higher numbers of multi-domains in a single lattice, thereby further increasing the information density in a given lattice.