Shallow Failure of Weak Slopes in Bayan Obo West Mine

The slope stability of large open-pit mines has always been a concern and the analysis of large-scale slope landslides is a focus. However, shallow failure in soft rock slopes also has a serious impact on safe production. The northern slope of Baiyunebo West Mine has many shallow landslides in the final slope, resulting in damage of the maintenance channel of the belt transportation system, which has a serious impact on the safety of production. In order to reduce the shallow failure in weak rock slope, it is necessary to analyze the behavior and characteristics of shallow failure in weak rock. Firstly, the mechanical parameters of the intact rock were obtained by using the exploration data; secondly, through the analysis of blasting-damage range, the distribution characteristics of fractures after the failure of weak rock were obtained. Finally, through theoretical analysis, numerical simulation, surface displacement monitoring and on-site shallow-failure case analysis, the deformation and characteristics of shallow failure of weak rock slope in West Mine were obtained. It was found that the mechanical parameters of rock mass strength on the surface of weak rock slope and the original rock were quite different after mining disturbance. The mode of failure of shallow weak rock slope in the West Mine was creep-cracking; the numerical modelling analysis was carried out by using the assignment method of shallow lithology weakening and gradual change, which is more in line with the deformation characteristics of weak rock slope in West Mine. The lower deformation of the soft rock slope in West Mine is 3–5 times that of the upper deformation. The research results are helpful to understand the influence of blasting on the stability of soft rock slope. At present, West Mine has started to adjust blasting parameters according to the research results, so as to reduce the excessive damage of blasting to rock mass, so the stability of the slope is improved.