Improving the Electrochemical Stability of a Polyester–Polycarbonate Solid Polymer Electrolyte by Zwitterionic Additives

[Image: see text] Rechargeable batteries with solid polymer electrolytes (SPEs), Li-metal anodes, and high-voltage cathodes like LiNi(x)Mn(y)Co(z)O(2) (NMC) are promising next-generation high-energy-density storage solutions. However, these types of cells typically experience rapid failure during galvanostatic cycling, visible as an incoherent voltage noise during charging. Herein, two imidazolium-based zwitterions, with varied sulfonate-bearing chain length, are added to a poly(ε-caprolactone-co-trimethylene carbonate):LiTFSI electrolyte as cycling-enhancing additives to study their effect on the electrochemical stability of the electrolyte and the cycling performance of half-cells with NMC cathodes. The oxidative stability is studied with two different voltammetric methods using cells with inert working electrodes: the commonly used cyclic voltammetry and staircase voltammetry. The specific effects of the NMC cathode on the electrolyte stability is moreover investigated with cutoff increase cell cycling (CICC) to study the chemical and electrochemical compatibility between the active material and the SPE. Zwitterionic additives proved to enhance the electrochemical stability of the SPE and to facilitate improved galvanostatic cycling stability in half-cells with NMC by preventing the decomposition of LiTFSI at the polymer–cathode interface, as indicated by X-ray photoelectron spectroscopy (XPS).