WEDM-Generated Slot Width Variation Modeling

Wire electrical discharge machining (WEDM) is a process that is used when it is necessary to manufacture small-width slots with a micrometer accuracy or to precisely detach parts with complex contours from metal workpieces in the form of sheets or plates. The fact that the wire electrode rests only in the working zone in two of its guides allows it to achieve micrometric oscillations, leading to the generation of an error from the flat shape of the slot surfaces that gradually develops into the workpiece. The slot widths are influenced by several factors, such as the workpiece thickness, pulse-on time, pulse-off time, the wire tension force, the current, and the wire movement speed along its axis. Some theoretical assumptions about the behavior of the wire electrode were first considered. An experimental research plan was then designed to obtain additional information on the influence of the mentioned factors on the slot width in different positions of the cross-section through the slot. The statistical processing of the experimental results led to the elaboration of empirical mathematical models that highlight the order of influence and the intensity of the influence exerted by the factors mentioned above.