Analysis of flow rate and pressure in syringe-based wound irrigation using Bernoulli's equation

The objective of this study was to examine the dependence of the pressure level in the wound area on the height of the syringe needle from the wound, the gauge of the needle, and the flow rate using the Bernoulli equation. This study was the control-volume analysis using the Bernoulli equation. At a given height of the syringe needle from the wound, the gauge of the syringe needle was fixed, and the pressure in the wound area, which depended on the flow rate of the irrigation solution discharged from the tip of the needle, was calculated according to the Bernoulli equation and the definition of the flow rate. At a constant flow rate of the irrigation solution, the velocity of the irrigation solution discharged through the syringe needle decreased (7.80 → 0.80) with an increase in the diameter of the needle (18G → 14G). At a constant inner diameter of the needle, the velocity of the irrigation solution increased with a reduction in the flow rate of the solution. As the velocity of the irrigation solution increased, the pressure in the wound area increased. As the height of the syringe needle from the wound area increased, the pressure in the wound area increased. In order to maintain the pressure of 8–15 psi when nurses perform syringe-based irrigation, it is necessary to set the flow rate of the cleaning solution from 3.5 cc/s to less than 4.8 cc/s for 19G. In addition, 20G maintains the flow rate of the solution at 2.6 cc/s or more and less than 3.5 cc/s, 22G maintains the flow rate of solution at 1.3 cc/s or more and less than 1.8 cc/s, and 25G maintains the flow rate of solution at 0.5 cc/s. This study provides nurses with a reference for the flow rate at which syringe-based irrigation can be performed while maintaining the appropriate pressure based on fluid dynamics, which can be used as the basis for wound nursing standards.