Powered knee and ankle prostheses enable natural ambulation on level ground and stairs for individuals with bilateral above-knee amputation: a case study

Ambulation with existing prostheses is extremely difficult for individuals with bilateral above-knee amputations. Commonly prescribed prostheses are passive devices that cannot replace the biomechanical functions of the missing biological legs. As a result, most individuals with bilateral above-knee amputations can only walk for short distances, have a high risk of falling, and are unable to ascend stairs with a natural gait pattern. Powered prostheses have the potential to address this issue by replicating the movements of the biological leg. Previous studies with individuals with bilateral above-knee amputations have shown that walking with powered prostheses is possible. However, stair ambulation requires different kinematics, kinetics, and power than walking. Therefore, it is not known whether powered prostheses can restore natural ambulation on stairs for bilateral above knee individuals. Here we show a case study with an individual with bilateral above-knee amputations using a pair of lightweight powered knee and ankle prostheses for walking and stair ambulation. The kinematic analysis shows that powered prostheses can restore natural leg movements, enabling the individual to walk and climb stairs using different gait patterns, such as step-over-step or step-by-step, one step or two steps at a time. The kinetic analysis shows that the powered prostheses can restore natural ankle push-off in walking and positive knee power generation in stair ascent, which are fundamental biomechanical functions of the missing biological legs. This case study is a first step towards enhancing functional mobility and quality of life for individuals with bilateral above-knee amputations through powered knee and ankle prostheses.