Study on Influencing Factors of Water Huff-n-Puff Oil Recovery in Matrix-Fracture Systems of the Tight Sedimentary Tuff Reservoirs

[Image: see text] Tight sedimentary tuff reservoirs (TSTRs) are a new type of tight oil reservoirs, which are mainly developed by water huff-n-puff (WHP). However, there is no quantitative study on the effect of water injection pressure (WIP) and fracture density (FD) on the oil recovery effect of WHP, and the reasons for the low flow-back rate (FR) of the injected water are also not fully explained. In this study, the real cores of TSTRs were used to simulate the seepage state of the matrix-fracture systems of the reservoir, the effects of WIP and FD on the WHP were quantitatively studied, and the reasons for the low FR of the injected water were comprehensively analyzed. The result shows that in five cycles of WHP, the recovery factor (RF) of the core only increases from 8.72 to 10.91% with the WIP increasing from 25 to 30 MPa. However, when the WIP is 40 MPa (rock breakdown pressure), the RF of the core reaches 16.47%, indicating that overfracture-pressure water injection has an obvious improvement effect on the oil recovery effect of WHP in TSTRs. Increasing the FD can also significantly improve the RF and oil recovery efficiency (ORE) of WHP in TSTRs. When the FD of the core increases from 0.34 to 0.44 cm(–1), the RF of five cycles of WHP increases by 9.26%, the ORE increases by 8.61%, and the FR of the injected water decreases by 0.56%. The reasons for the low FR of the injected water in WHP in tight oil reservoirs are matrix water locking, fracture water locking, and reservoir nonconstant-volume water locking. The study can provide an important reference for the efficient development of the WHP in TSTRs.