Scalable Microfabrication of Multi-Emitter Arrays in Silicon for a Compact Microfluidic Electrospray Propulsion System

[Image: see text] The recent proliferation of SmallSats and their use in increasingly demanding applications require the development of onboard electric propulsion compatible with the power, mass, and volume constraints of these spacecraft. Electrospray propulsion is a promising technology for SmallSats due to its unique high efficiency and scalability across the wide power range of these platforms, for example, from a few watts available in a CubeSat to a few hundred watts in a MiniSat. The implementation of electrospray propulsion requires the use of microfabrication techniques to create compact arrays of thousands of electrospray emitters. This article demonstrates the microfabrication of multi-emitter electrospray sources of a scalable size for electrospray propulsion. In particular, a microfabrication and assembly process is developed and demonstrated by fabricating sources with arrays of 1, 64, and 256 emitters. The electrospray sources are tested in a relevant environment for space propulsion (inside a vacuum chamber), exhibiting excellent propulsive performance (e.g., absence of beam impingement in the extractor electrode, absence of hysteresis in the beam current versus propellant flow rate characteristic, proper operation in the cone-jet electrospraying mode, etc.) and nearly coincident output per emitter. Several design elements contribute to this performance: the even distribution of the propellant among all emitters made possible by the implementation of a network of microfluidic channels in the backside of the emitter array; the small dead volume of the network of microfluidic channels; the accurate alignment between the emitters and extractor orifices; and the use of a pipe-flow configuration to drive the propellant through closed conduits, which protects the propellant.