Effect of Graphene Sheets Embedded Carbon Films on the Fretting Wear Behaviors of Orthodontic Archwire–Bracket Contacts

Carbon films were fabricated on the orthodontic stainless steel archwires by using a custom-designed electron cyclotron resonance (ECR) plasma sputtering deposition system under electron irradiation with the variation of substrate bias voltages from +5 V to +50 V. Graphene sheets embedded carbon (GSEC) films were fabricated at a higher substrate bias voltage. The fretting friction and wear behaviors of the carbon film-coated archwires running against stainless steel brackets were evaluated by a home-built reciprocating sliding tribometer in artificial saliva environment. Stable and low friction coefficients of less than 0.10 were obtained with the increase of the GSEC film thickness and the introduction of the parallel micro-groove texture on the bracket slot surfaces. Particularly, the GSEC film did not wear out on the archwire after sliding against three-row micro-groove textured bracket for 10,000 times fretting tests; not only low friction coefficient (0.05) but also low wear rate (0.11 × 10(−6) mm(3)/Nm) of the GSEC film were achieved. The synergistic effects of the GSEC films deposited on the archwires and the micro-groove textures fabricated on the brackets contribute to the exceptional friction and wear behaviors of the archwire-bracket sliding contacts, suggesting great potential for the clinical orthodontic treatment applications.