Activation of Peracetic Acid with CuFe(2)O(4) for Rhodamine B Degradation: Activation by Cu and the Contribution of Acetylperoxyl Radicals

Advanced oxidation processes (AOPs) demonstrate great micropollutant degradation efficiency. In this study, CuFe(2)O(4) was successfully used to activate peracetic acid (PAA) to remove Rhodamine B. Acetyl(per)oxyl radicals were the dominant species in this novel system. The addition of 2,4-hexadiene (2,4-HD) and Methanol (MeOH) significantly inhibited the degradation efficiency of Rhodamine B. The ≡Cu(2+)/≡Cu(+) redox cycle dominated PAA activation, thereby producing organic radicals (R-O˙) including CH(3)C(O)O˙ and CH(3)C(O)OO˙, which accounted for the degradation of Rhodamine B. Increasing either the concentration of CuFe(2)O(4) (0–100 mg/L) or PAA (10–100 mg/L) promoted the removal efficiency of this potent system. In addition, weakly acid to weakly alkali pH conditions (6–8) were suitable for pollutant removal. The addition of Humid acid (HA), HCO(3)(−), and a small amount of Cl(−) (10–100 mmol·L(−1)) slightly inhibited the degradation of Rhodamine B. However, degradation was accelerated by the inclusion of high concentrations (200 mmol·L(−1)) of Cl(−). After four iterations of catalyst recycling, the degradation efficiency remained stable and no additional functional group characteristic peaks were observed. Taking into consideration the reaction conditions, interfering substances, system stability, and pollutant-removal efficiency, the CuFe(2)O(4)/PAA system demonstrated great potential for the degradation of Rhodamine B.