Effects of Accelerated Ageing by Humidity and Heat Cycles on the Quality of Bamboo

The effect of humidity and heat environmental conditions on the durability of conventional bamboo materials is a pressing issue in the reserving phase of biomass materials. In this study, the relationship between the main physicochemical, pyrolytic, and mechanical properties of bamboo before and after ageing has been investigated. Exposure of engineered bamboo raw materials with moisture content up to 10% to alternating humidity and heat cycles (20 °C 98% RH-30 °C 64% RH-40 °C 30% RH) of ageing (HHT) causes degradation of the chemical polymer matrix. Byk Gardner 6840 color difference meter, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), compression intensity, thermogravimetric-infrared spectroscopy (TG-IR), and density changes are used to assess the quality of the material before and after ageing. No significant changes in the moisture content within the range of 6.12 ± 0.327 after two weeks of the engineered bamboo during wet thermal cyclic ageing were determined. However, there were significant differences in mass loss (7.75–9.93 g), cellulose crystallinity, chemical changes, compression strength, and pyrolytic properties. Differences in specimen colors were observed during 10 weeks of the accelerated humidity heat cycling ageing, and TCD variations ranged from 3.75 to 20.08 and from 0.25 and 3.24, respectively. Reduced cellulose crystallinity (36.459–22.638%), axial compressive strength (63.07–88.09 MPa), and modulus of rupture (2409–4286 MPa) were found during aging, whereas deformation and ductility properties were improved. Both natural and humidity heat ageing improve thermal stability and peak pyrolysis rates (0.739–0.931; 0.731–0.797). Humidity heat cyclic ageing will assist in the design and risk assessment of warehousing environments for industrial applications.