Cargando…

Kinetics of Magnesiothermic Reduction of Natural Quartz

In this work, the kinetics of natural quartz reduction by Mg to produce either Si or Mg(2)Si was studied through quantitative phase analysis. Reduction reaction experiments were performed at various temperatures, reaction times and Mg to SiO(2) mole ratios of 2 and 4. Rietveld refinement of X-ray di...

Descripción completa

Detalles Bibliográficos
Autores principales: Rasouli, Azam, Tsoutsouva, Maria, Safarian, Jafar, Tranell, Gabriella
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2022
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9571835/
https://www.ncbi.nlm.nih.gov/pubmed/36233875
http://dx.doi.org/10.3390/ma15196535
Descripción
Sumario:In this work, the kinetics of natural quartz reduction by Mg to produce either Si or Mg(2)Si was studied through quantitative phase analysis. Reduction reaction experiments were performed at various temperatures, reaction times and Mg to SiO(2) mole ratios of 2 and 4. Rietveld refinement of X-ray diffraction patterns was used to obtain phase distributions in the reacted samples. SEM and EPMA examinations were performed to evaluate the microstructural change during reduction. The results indicated that the reduction reaction rate was slower at a mole ratio of 2 than 4 at the same temperature, as illustrated by the total amount of Si formed (the percent of Si that is reduced to either Si or Mg(2)Si to total amount of Si) being 59% and 75%, respectively, after 240 min reaction time for mole ratios of 2 and 4. At the mole ratio of 4, the reaction rate was strongly dependent on the reaction temperature, where SiO(2) was completely reduced after 20 min at 1273 K. At the lower temperatures of 1173 and 1073 K, total Si formed was 75% and 39%, respectively, after 240 min reaction time. The results of the current work show that Mg(2)Si can be produced through the magnesiothermic reduction of natural quartz with high yield. The obtained Mg(2)Si can be processed further to produce silane gas as a precursor to high purity Si. The combination of these two processes offers the potential for a more direct and low carbon method to produce Si with high purity.