Thermal and Mechanical Characterization of the New Functional Composites Used for 3D Printing of Static Mixers

This paper investigates the possibility of integrating the combination of nanofillers, titanium dioxide (TiO(2)) and carbon nanotubes (CNT) into the thermoplastic polymer matrix. This combination of fillers can possibly modify the physico-chemical properties of composites compared to the pure polymer matrix. The composites were blended using the extrusion method. The composite filament produced was used to manufacture static mixers on a 3D printer using the additive manufacturing technology fused filament fabrication (FFF). The aim of this work was to inspect the influence of the filler addition on the thermal and mechanical properties of glycol-modified polyethylene terephthalate (PET-G) polymer composites. The fillers were added to the PET-G polymer matrix in several ratios. Tensile test results showed an increase in the overall strength and decrease in the elongation at break of the material. Melt flow rate (MFR) showed a decrease in the viscosity with the initial filler addition and reaching a plateau after 2 wt% filler was added. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) showed minor changes in the thermal properties. Scanning electron microscope (SEM) results showed homogenous distribution of the filler in the matrix and strong filler–matrix adhesion. The results indicate suitable properties of new functional composites for the 3D printing of static mixers for application in tubular reactors.