Synthesis and Characterization of Maleic Anhydride-Methyl Methacrylate Co-Monomer Grafted Polyethylene Wax for Hot Waxed Wood Process

The beeswax used in Chinese traditional hot waxed wood technology has several drawbacks, such as high price, scarce resources, and poor heat resistance. To expand the application of hot waxing technology in the field of wood decoration and protection, polyethylene wax was modified by a grafted maleic anhydride-methyl methacrylate co-monomer. A type of modified polyethylene wax with low cost, high melting point, high stability, and strong polarity suitable for hot waxed wood was prepared as a replacement for beeswax. The effects of the grafting conditions on the chemical properties, thermal properties, chemical structure, and crystallization properties of modified polyethylene wax were studied and compared to those of beeswax. The results show that maleic anhydride-methyl methacrylate co-monomer grafting can effectively improve the acid value of polyethylene wax. For the ratio of two monomers of 1/1, the total amount of monomer of 8 wt%, the amount of initiator of 2 wt%, the reaction temperature of 150 °C, and the acid value of modified polyethylene wax was consistent with that of beeswax, realizing the simulation of the main chemical properties of beeswax. The thermal stability and melting temperature of the modified polyethylene wax are significantly higher than those of beeswax, its crystal structure is similar to that of beeswax, and the cyclic anhydride groups and ester groups introduced by co-monomer grafting endow it with polar groups that play an important role in the wood hot waxing process.