Nanohybrid of Co(3)O(4) Nanoparticles and Polyphosphazene-Decorated Ultra-Thin Boron Nitride Nanosheets for Simultaneous Enhancement in Fire Safety and Smoke Suppression of Thermoplastic Polyurethane

Thermoplastic polyurethane (TPU) is widely used in daily life due to its characteristics of light weight, high impact strength, and compression resistance. However, TPU products are extremely flammable and will generate toxic fumes under fire attack, threatening human life and safety. In this article, a nanohybrid flame retardant was designed for the fire safety of TPU. Herein, Co(3)O(4) was anchored on the surface of exfoliated ultra-thin boron nitride nanosheets (BNNO@Co(3)O(4)) via coprecipitation and subsequent calcination. Then, a polyphosphazene (PPZ) layer was coated onto BNNO@Co(3)O(4) by high temperature polymerization to generate a nanohybrid flame retardant named BNNO@Co(3)O(4)@PPZ. The cone calorimeter results exhibited that the heat release and smoke production during TPU combustion were remarkably restrained after the incorporation of the nanohybrid flame retardant. Compared with pure TPU, the peak heat release rate (PHRR) decreased by 44.1%, the peak smoke production rate (PSPR) decreased by 51.2%, and the peak CO production rate (PCOPR) decreased by 72.5%. Based on the analysis of carbon residues after combustion, the significant improvement in fire resistance of TPU by BNNO@Co3O4@PPZ was attributed to the combination of quenching effect, catalytic carbonization effect, and barrier effect. In addition, the intrinsic mechanical properties of TPU were well maintained due to the existence of the PPZ organic layer.