The Investigation of Gas Distribution Asymmetry Effect on Coriolis Flowmeter Accuracy at Multiphase Metering

Multiphase flows are encountered in various industries, and the Coriolis flowmeter (CFM) is considered a high potential flowmeter for the metering of these flows. However, the decoupling effect and asymmetrical gas distribution in a CFM might decrease the accuracy of its multiphase flow metering The asymmetry of gas distribution in a CFM and its influence on the metering accuracy have only been qualitatively investigated in a few studies. The present paper quantitatively describes the gas distribution asymmetry in several CFMs under different flow conditions by numerical simulation. The simulation methodology is developed and validated by a results comparison with a conducted experiment and published data for bubbly, stratified and transitional flow regimes. U-shaped and triangle-shaped CFMs of different diameters are investigated at different gas volume fractions and flow rates. It is shown that the increase in the gas volume fraction and the reduction in the mixture flow rate lead to the increase in the gas distribution asymmetry. The strong correlation between the gas distribution asymmetry and the experimentally observed CFM error is demonstrated. The correction of the CFM error is proposed based on this correlation allowing the metering error to be decreased from 34% to 10% for the investigated conditions.