Cargando…

Ultrasonic Guided Waves for Liquid Water Localization in Fuel Cells: An Ex Situ Proof of Principle

Water management is a key issue in the design and operation of proton exchange membrane fuel cells (PEMFCs). For an efficient and stable operation, the accumulation of liquid water inside the flow channels has to be prevented. Existing measurement methods for localizing water are limited in terms of...

Descripción completa

Detalles Bibliográficos
Autores principales: Sablowski, Jakob, Zhao, Ziwen, Kupsch, Christian
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2022
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9656768/
https://www.ncbi.nlm.nih.gov/pubmed/36365993
http://dx.doi.org/10.3390/s22218296
Descripción
Sumario:Water management is a key issue in the design and operation of proton exchange membrane fuel cells (PEMFCs). For an efficient and stable operation, the accumulation of liquid water inside the flow channels has to be prevented. Existing measurement methods for localizing water are limited in terms of the integration and application of measurements in operating PEMFC stacks. In this study, we present a measurement method for the localization of liquid water based on ultrasonic guided waves. Using a sparse sensing array of four piezoelectric wafer active sensors (PWAS), the measurement requires only minor changes in the PEMFC cell design. The measurement method is demonstrated with ex situ measurements for water drop localization on a single bipolar plate. The wave propagation of the guided waves and their interaction with water drops on different positions of the bipolar plate are investigated. The complex geometry of the bipolar plate leads to complex guided wave responses. Thus, physical modeling of the wave propagation and tomographic methods are not suitable for the localization of the water drops. Using machine learning methods, it is demonstrated that the position of a water drop can be obtained from the guided wave responses despite the complex geometry of the bipolar plate. Our results show standard deviations of 4.2 mm and 3.3 mm in the x and y coordinates, respectively. The measurement method shows high potential for in situ measurements in PEMFC stacks as well as for other applications that require deposit localization on geometrically complex waveguides.