Experimental Research on the Treatment of Stormwater Contaminated by Disinfectants Using Recycled Materials—Hemp Fiber and Ceramzite

Pollution caused by the use of disinfectants in public spaces is a relatively new form of environmental contamination. During the COVID-19 pandemic of 2020–2021, early research showed a sevenfold increase in the use of disinfectants to clean outdoor spaces and a corresponding increase in environmental pollution. Typically, after entering stormwater systems, disinfectants are carried to surface waters (e.g., rivers, seas and lakes) where they react with various elements to form harmful compounds. In the absence of data, it is not possible to determine accurate levels of pollution according to the latest scientific information. Our enquiry demonstrates that stormwater pollution indicators (pH, conductivity, turbidity and color intensity) change depending on the amounts of disinfectants present. Laboratory tests were conducted using hemp fiber and ceramzite, in which filtered stormwater samples contaminated with different amounts of disinfectants showed decreases in the amounts of active chlorine from 2.93 ppm to 1.0 ppm. Changes in pH levels, conductivity, turbidity and color intensity were monitored before and after filtration; pH indicators changed slightly (from 7.81 to 7.85), turbidity changes varied in the range of 0.070–0.145 NTU and the highest value of color intensity (1.932 AV) was obtained when 50 mL of disinfectant was added to the investigated sample water. This article presents the results of our research into the impact of disinfectants on stormwater. Further investigation is needed in order to determine the impacts of chemical substances on our water ecosystem.