Effectiveness of formaldehyde in various soil types as a wide area decontamination approach for Bacillus anthracis spores

The purpose of this study was to evaluate and compare the decontamination efficacy of liquid formaldehyde solutions for three soil types (sand, loam, and clay) against spores of Bacillus anthracis (B.a.) and Bacillus atrophaeus. Approximately 1 x 10(8) colony forming units were inoculated into each sample. Through a series of six bench-scale experiments, two concentrations and two volumes of liquid formaldehyde solution were then added to the soil samples and allowed to remain in contact for either 24 or 48 hours. Decontamination efficacy was assessed at either 22° or 10°C with or without lids atop the sample jars. Complete inactivation (no spores recovered from the soil samples, typically providing > 7 log reduction) of B.a. occurred in all soil types in five of the six tests, while complete inactivation of B. atrophaeus was achieved in all soil types for three of the six tests. The results demonstrated a higher probability of complete inactivation of spores for samples that were covered, samples that received the higher volume of formaldehyde, and those contaminated with B.a. Overall, the use of liquid formaldehyde solution (2.5–5%) was highly effective in inactivating entire spore populations (typically > 10(7) CFU) for both B.a. and B. atrophaeus in the soil matrices studied. Covering the soil after application would allow for less formaldehyde solution to be used without impacting the overall efficacy of the process. The data from this study may aid in the selection of appropriate decontamination parameters when using liquid formaldehyde for soil remediation. The data may also aid in the decision to use B. atrophaeus as a surrogate for B.a. when performing further decontamination studies using liquid formalin solutions.