Acid and Rennet Coagulation Properties of A2 Milk

This study investigated the acid and rennet milk coagulation properties of A2 milk (β-casein (CN) A2A2 genotype), in comparison to a control milk (blend of A2A1/A1A1/A2A2 genotypes). Acid and rennet coagulation were evaluated using the Optigraph(®) system, measuring the coagulation time, aggregation rate, and gel density or curd firmness. The acidification kinetics were monitored using a CINAC(®) system, evaluating the time to reach pH 4.6, the acidification rate, the maximum acidification rate, the time required to reach it, and the latency time. The water-holding capacity of acid milk gels and the potential yield, total solids, and syneresis of enzymatic gels were also evaluated. Some variables were highly influenced by the farm factor, showing the importance of the effect of extrinsic parameters. Acid and enzymatic coagulation times were not affected in either milk. The A2 milk presented higher acid gel density and latency time than the control milk. Although the differences in water-holding capacity were not statistically significant, the A2 milk presented lower values, related with the higher gel density. The A2 milk also showed higher rennet aggregation rate and curd firmness than the control milk. Potential yield and syneresis were higher in the A2 milk, which is in accordance with the higher firmness of curd. Coagulation results and gel and curd properties indicate that it is possible to manufacture acid and rennet coagulation dairy products from A2 milk with no major differences when compared with a control milk.