Surface Modification of a Regenerated Cellulose Film Using Low-Pressure Plasma Treatment with Various Reactive Gases

[Image: see text] There is a growing interest in the fabrication of membranes and packaging materials from natural resources for a sustainable society. A regenerated cellulose (RC) film composed solely of cellulose has outstanding advantages including biodegradability, transparency, mechanical strength, and thermal stability. To expand the application of the RC film, various surface modification methods have been proposed. However, conventional chemical methods have disadvantages such as environmental burden and difficulty in controlling the reaction. In this work, low-pressure plasma treatment, a green, solvent-free, and easily controllable approach, was performed for surface modification of the RC film. The effects of three different plasma species (O(2), N(2), and CF(4)) and treatment conditions on the surface properties of RC films were investigated based on water contact angle measurements, chemical composition analysis, and surface topography. O(2) and N(2) plasma treatment slightly enhanced the surface wettability of RC films due to the etching by the plasma reactive species and the formation of new hydrophilic functional groups. In CF(4) plasma treatments, the hydrophobic surface with a contact angle of 120.6° was obtained in a short treatment time (60 s) owing to the deposition of fluorocarbon groups on the surface. However, the treated surface in a longer reaction time resulted in increased wettability due to the diffusion and degradation of fluorine-containing bonds. The new insights could be valuable for further studies of surface modification and functionalization of RC films.