Experimental Investigation on the Impacts of Fracture Roughness and Fluid Composition on the Formation of Bubble Bridges through the Microbubble Fluid Flow

[Image: see text] The colloidal gas Aphron (CGA) drilling fluids are an alternative to ordinary drilling mud to minimize formation damage by blocking rock pores with microbubbles in low-pressure or depleted reservoirs. Fractured formations usually have different characteristics and behavior in contrast to conventional ones and need to be investigated for Aphron applications. In this research, a series of core flood tests were conducted to understand the factors controlling the pore-blocking mechanisms of microbubbles in fractured formations. For the first time, a synthetic metal plug was used to simulate the fracture walls and eliminate the formation matrix effect. This study analyzed the effects of three fluid compositions, considering the polymer and surfactant concentrations at reservoir conditions, including temperature and overburden pressure. Additionally, fracture surface roughness as one of the parameters affecting the microbubble fluid penetration through the fracture path and bubble blockage were studied. The results indicated that microbubble fluid composition would not affect the bubble size or blockage probability. The different stable microbubble fluids resulted in the same pattern and conditions. Besides, fluid penetration would be more challenging if the fracture roughness decreased. Due to the accumulation of bubbles and the fact that some of them were trapped in the fracture’s rough surface, the blockage possibility increased. According to the range of roughness for the steel core in previous studies and compared with the roughness of carbonate reservoir rocks, the roughness of fractured reservoir rocks is much higher than that of the steel surface. Accordingly, the observed trend in the experiments showed that when it is possible to form a bubble bridge in steel cores, then in carbonate rocks, we will definitely see blockage with any roughness, provided that other parameters are acceptable.