Study of the Possibility of Recycling of Technogenic Hafnium during Electron Beam Refining

The possibility of removing metallic (such as Zr, Fe, Cr, and Zn) impurities and non-metallic (such as [O] and C) impurities from technogenic hafnium through single and double refining in the conditions of electron beam melting (EBM) has been studied. The influence of thermodynamic and kinetic parameters on the degree of removal of these impurities from the base metal under vacuum conditions and within a temperature interval of 2500 K to 3100 K is defined. The relative volatility of metal impurities and the stability of the oxides and carbides present in the base metal are evaluated. The possibility for complete removal of Fe, Cr, Zn, [O], and C during EBM is shown. In the case of double refining, at a temperature of 2700 K for 20 min, the maximum degree of removal of Zr is 46.8%, the achieved highest hafnium purity is 99.004%, and the overall effectiveness of the refining of hafnium from impurities is 53%. There is a correlation between the degree of removal of Zr and the micro-hardness of the Hf ingots obtained after EBM. The weight losses vary in the ranges of 1.5–5.8% and 1–8% under the studied single and double refining processes, respectively.