Evaluation method of surrounding rock stability: Failure approach index theory of strain limit analysis for engineering applications

In general, the ultimate parameter selection method of the failure approach index theory among the three-dimensional problems in geotechnical engineering is unclear in theory, and the symbol convention of the failure approach index in engineering calculation is contrary to the stipulation of the numerical simulation software. Hence, the values of the ultimate plastic shear strain are difficult to determine. To solve this problem, the criterion of positive tension and negative compression and the sequence of the principal stress σ(1) ≤ σ(2) ≤ σ(3) are defined in this paper, and the expression of Mohr–Coulomb yield approach index id deduced. Under the condition of the principal strain sequence ε(1) ≤ ε(2) ≤ ε(3), the formula of the ultimate shear strain is derived using the method of the ultimate strain analysis so as to obtain the simple expression and calculation method of the ultimate plastic shear strain, which has provided the calculation parameters for the three-dimensional ultimate plastic shear strain in the Mohr–Coulomb strain softening model and improved the failure approach index theory. In the light of the aforementioned theory, the ultimate strains of cubic concrete specimens are analyzed, and the obtained ultimate strain values are found consistent with previous research findings, which verifies the correctness and reliability of the ultimate strain analysis method. In addition, it is applied to the quantitative elastic–plastic failure analysis of the section coal pillar in Hengjin coal industry for determining its reasonable retainment width. Consequently, the research results can be embraced as the theoretical basis for the stability analysis of geotechnical materials and exhibits engineering application potential.